|
Go to www.ChampionShooters.com to order from our Online Store |
Scope Stands
Freeland Bipod Scope Stand
| The Freeland Regal Bipod stand is the best known stand in the shooting industry. It is made of aluminum castings with a brown wrinkle finish and available with either the saddle head, zoom, or swivel head assembly. The saddle head is adaptable to most any scope, holding it in a clamp ring, while the zoom head is made for scopes with the "boss" mount 1/4" x 20 thread. The Swivel head is like the zoom yet its mount swivels on a large ball bearing giving it 180 degrees worth of adjustment. The Regal Bipod features quick adjustment for elevation and allows for full panoramic view. It comes complete with a 21" steel extension and carry ball. Weighs 4.5 lbs. |
 |
Freeland Bipod Stand w/Saddle Head (Available in standard or large ring clamp) | $115.00 |
|
|
Freeland Bipod Stand w/Zoom Head | $115.00 |
|
|
Freeland Bipod Stand w/Swivel Head | $140.00 |
|
|
Freeland Bipod Base Only | $50.00 |
Freeland Tripod Scope Stand
The new tripod stand is
designed for the larger and heavier spotting scopes that are in use today,
as the Kowa TSN 1 & 2. Still uses the same proven Regal head Assembly as the
bipod for compatibility.  Each leg has independent adjustment for uneven ground Large support area for more stability. Scope can go lower to the ground. No problem with 45
degree scopes in the prone position. It comes complete with a 21" extension and carry ball. Weighs only 5 pounds. |
|
|
Freeland Tripod Stand w/Saddle Head (Available in standard or large ring clamps) | $115.00 |
|
|
Freeland Tripod Stand w/Zoom Head | $115.00 |
|
|
Freeland Tripod Stand w/Swivel Head | $140.00 |
|
|
Freeland Tripod Base Only | $55.00 |
Head Assemblies
| The new universal head assembly will fit
rods from 5/8" all the way up to 1.3" rods. The new swivel head allows you to set and
lock the friction you want your scope to rotate on, thus no need to mess
with knobs while you are in position. Simply move the scope where you want
it to go and it stays where you put it. The scope must have a screw mount to
attach it to. The saddle mount clamps around the scope and allows you to rotate it within the band. No screw mount is required to mount the scope. The zoom head assembly is ideal for scopes that come with a rotating band like Kowa and Konus. The scope is attached via the screw scope mount. |
|
|
NEW- Swivel Head Assembly | $95.00 |
|
|
Saddle Head Assembly | $60.00 |
|
|
Zoom Head Assembly | $60.00 |
|
Swivel Head Only | $49.00 |
|
Zoom Head Only | $25.00 |
|
Saddle Head Only | $25.00 |
Accessories
NEW - Freeland Rod
Stabilizer
| The new Freeland Rod
Stabilizer reduces unwanted scope stand vibrations very quickly through our
vibration suppression technology (patent pending).
All poles no mater what diameter will succumb to vibrations if they are
bumped. The Freeland Rod Stabilizer actively suppresses unwanted vibrations as they happen. How it works: Simply attach it to the top of your 5/8" rod or 1" rod, level your Freeland Tripod Stand and it does the rest. The stabilizer works best on stands that can be leveled, such as the Freeland Tripod scope stand where each leg can be adjusted in seconds for a perfectly balanced system. Once the system is in balance the stabilizer works at its optimum efficiency. It will still suppress vibrations on non-level stands but the efficiency may be reduced. |
| Video of the Stabilizer in action after hard bump (.wmv format) |
|
|
Freeland Scope Stand Rod Stabilizer | $25.00 |
Champion Scope Stand Weight
| A compact Weight of 7.5 pounds of solid steel. It will accept the standard Freeland extension rod. At today's spotting scope prices, this is inexpensive insurance. |
|
|
Champion Scope Stand Weight 7.5 lbs | $28.00 |
Other Accessories
| This 21 Inch 5/8 inch thick Chromed Steel Extension Rods are used on the Freeland scope stands and off hand stand. 5/8" is the most common rod size and it has been the standard size for scope stands since the 1950's. |
|
|
Freeland 21" x 5/8" Extension Rod, Steel | $13.95 |
| These 21 Inch long 1 inch thick Chromed Steel Extension Rods are used on the Freeland tripod scope stands. You will need a 5/8" to 1" adaptor to be able to use the 1" rod on a 5/8" scope stand. To use the 1" rods, be sure that you have the Universal Head assembly that can use any size rod from 5/8" to 1.37" Rods. |
|
|
Freeland 21"x 1" diam. Extension Rod, Steel | $25.00 |
|
|
Freeland 5/8" to 1" Adaptor Rod | $5.95 |
|
|
Carry Ball | $4.00 |
Heavy Duty Tripod for 100mm Scopes or Larger
| This is similar to the older style Team Scope Stands used
for their 100mm Unertl team scopes. You can use it sitting in a chair or
standing. Heavy-duty tripod features sturdy tripod with accessory tray and
flex cables for fine vertical and horizontal adjustments. Coarse adjustments
are also possible. This is just what you need for very large scopes. General Description: Sliding ¼ inch - 20 mounting screw for scope Flexible cables for fine vertical and horizontal adjustment Max extended height - 45 inches Folded height - 32 inches Extendable tripod legs with heavy duty mount head |
|
|
Heavy Duty Tripod - for Large Scopes | $89.00 |
Table Top Tripod
| This tiny tabletop tripod is perfect for bench-rest shooting. It takes little space yet it's capable of holding large scopes. Tiltable 1/4" x 20 mounting base that will fit scopes and cameras. Stand comes with vertical and horizontal slow motion controls and extendable central column. Legs collapse for storage and transport. |
|
|
Heavy Duty Tripod - for Large Scopes | $14.95 |
This page is a part of :