CHAMPION SHOOTERS SUPPLY New products

NEW - MTM Case-Gard TM introduces a pocket sized scale that is sure to satisfy all level of sportsmen. Great for the reloading bench or a well equipped shooting box, the DS-1200 is packed with features that shooting sportsmen require. Retail $39.95

Features include:
• Up to 1200 grain capacity with plus or minus .1 grain accuracy.
• Easy to read, backlit LCD display.
• Uses 2 CR2032 Lithium batteries (Batteries are included a $7 value)
• Extended, 3 minute auto shut-off, most scales turn off after 30 seconds.
• Powder pan, custom designed to facilitate bullet, powder and arrow weighing.
• Calibration weight and detailed instructions included.
• Measures in grains, grams, carats and ounces.
• A high-quality, foam lined case for permanent storage and protected travel.

Yes, it really does work and it only costs $27.00, compare to $100+ scales!

This is a true completely adjustable 2-stage trigger that will attach to a Remington 700 or Rem.700/40X Clones. You can get it with or without the safety. It comes with either a curved or straight/reversible trigger shoe. Since it uses a 3.5mm Anschutz type trigger rail, any Anschutz 54 trigger shoe will fit. Adjustable pull weights from 10oz to over 63 oz! It can also be adjusted to be used as a single stage trigger. This is the best, most well designed trigger we've ever seen for Rem. 700. It's very close to an Anschutz trigger. No modifications required to install; for liability reasons have a gunsmith install/adjust it. More models/actions coming soon! We will have one on display at the 2008 NRA show coming in May 2008, a must see!

We now have a stand for highpower shooters with very large scopes. This stand comes with 3, 1” diameter. x 22" steel rods, a new stabilizer that actively reduces vibrations caused by wind gusts or bumping the stand. The base goes lower to the ground then any other stand and it can be leveled for uneven terrain. Pick the universal head assembly of your choice. The Saddle head assembly is adaptable to most any scope, it holds the scope in a camp ring instead of using the camera tripod threads. The zoom head is made for scopes with the ¼” x 20 thread found on nearly all scopes/cameras. Scope mounts to the side of the zoom adapter. The swivel head assembly is the most universal mounting system. It is made for scopes with the “boss” mount ½” x 20 thread It allows all angles of adjustment.

This new universal regal head assembly has been created to fit any size extension rod from the standard 5/8” to 1.37” rods. This gives you the ability to use your head assembly almost anywhere. It will allow you to mount it to camera tripods, PVC tubes, Steel pipes, and various other stands/poles. The V bracket gives you a no slip secure hold capable of holding even the heaviest scopes.

This device delivers a fast, accurate and easy to read wind speed. It can be hand held or you can set it on its flat bottom. It also has a standard camera mount for more mounting options. It can even be used in the rain. By a simple push of a button you may select one of the following units: KM/H, KTS, M/S, or MPH. A combination of precision mechanics and quartz-controlled electronics guarantees the highest level of accuracy over the entire temperature range. A standard CR2032 lithium battery will supply your wind meter with power for approximately 10 years. After that time, you can simply replace the battery yourself. Best of all unlike many other wind gauges the delicate wind-cups are protected thus insuring your investment. 2 Years manufacturer's warranty

Housing:
- Tripod thread: in bottom of housing
- Plastic, densely bonded
- Water-resistant and floats

LCD-Display:
- Current wind speed
- Average wind speed
- Maximum wind speed
- Beaufort bar graph

Windmills have been used in outdoor shooting for years and they have been proven to help the shooter better judge wind conditions. This product comes complete with a level bubble, 3 leveling knobs, a tripod base, and a hard case to transport it. This is the best windmill ever made, improvements: tripod base - works much better on grass, level bubble on the actual rod instead of the base for most accurate reading, extremely sensitive internal bearings, an elevated and adjustable pointer (closer to eye level), and a heavy duty storage case.

The new Freeland Rod Stabilizer reduces unwanted scope stand vibrations very quickly through our vibration suppression technology (patent pending).

All poles no mater what diameter will succumb to vibrations if they are bumped.
The Freeland Rod Vibration Suppressor significantly reduces the amount of time it takes for the rod to return to a steady position. Without an active vibration suppressor the vibrations will continue for 25 seconds or more regardless of the diameter of the rod. With the suppressor the vibrations caused by wind or bumps are reduced in considerably less time then without. Ideal for standing position with large scopes.

The Freeland Rod Stabilizer actively suppresses unwanted vibrations as they happen. How it works: Simply attach it to the top of your Freeland Tripod Stand and it does the rest.

The stabilizer works best on stands that can be leveled, such as the Freeland Tripod scope stand where each leg can be adjusted in seconds for a perfectly balanced system. Once the system is in balance the stabilizer works at its optimum efficiency. It will still suppress vibrations on non-level stands but the efficiency may be reduced.

Video of the Stabilizer in action (.wmv format)

We are bringing together two of the best names in accuracy to make one great bench rest rifle. Anschutz's world record setting 54 barrel action and Kelbly's world famous bench rest stock are now compatible with each other. If you're a target shooter thinking about getting into bench rest this is the stock you need. All you need to do is take your barrel action off your Anschutz 54 action target rifle and drop it into this stock and you are ready for bench rest competition. Stock comes complete with trigger guard, recoil lug and action screws. The trigger guard has a flat on the back so you can pinch trigger if you desire. The forend is a bit longer then the Anschutz BR stock for additional balance adjustment if needed. Stock weight is 2 lbs. Any round single shot 54 Action will fit this stock. Here is a list of compatible Anschutz models 1407, 1411, 1413, 1807, 1811, 1813, 1907, 1911, 1912, 1913.
Stocks are available in Black, Blue or Red.

Complete gun with stock available too, call 800-281-4867

All you need to do is take your barrel action off your Anschutz 54 action target rifle and drop it into this stock and you are ready for bench rest competition. Stock comes complete with trigger guard, recoil lug and action screws. Stock weight is about 4 lbs. Any round single shot 54 Action will fit this stock. Here is a list of compatible Anschutz models 1407, 1411, 1413, 1807, 1811, 1813, 1907, 1911, 1912, 1913.

This is a really nice rifle! The Weatherby Mark 22 has a very attractive Monte Calro walnut stock with high gloss finish, checkered pistol grip and forend. The rifle comes with a 5 shot test group under a dime at 50 meters making it as accurate as an Anschutz 64 action rifle. Gun weight is 6 1/2 lbs. The rifle is drilled and tapped for weaver scope mounts or you can use the 11mm rail on the receiver to mount a scope. It comes with an adjustable trigger and 5 shot clip. 10 shot clips are also available. If your looking for a really nice looking / shooting sporting rifle that won't brake the bank this is it.

TRC-700S	CG Trigger Rem 700 with Safety	$330.00
TRC-700	CG Trigger Rem 700	$300.00

	Freeland Heavy Duty Tripod Stand w/Saddle Head (Available in standard or large ring clamps)	$215.00
	Freeland Heavy Duty Tripod Stand w/Zoom Head	$215.00
	Freeland Heavy Duty Tripod Stand w/Swivel Head	$240.00

	Digital Wind Gauge	$69.00
	Digital Wind Gauge with Hard Case	$74.00

Weatherby Mark XXII .22 repeater	$765.00
Weatherby Mark XXII .17HMR repeater	$785.00